Jim,
The car on the cover of the November issue of AHM is a BN4 and the wheels
are the original stock Austin steel wheels. I don't know if they are
availed except used from someone like British Car Specialists. If the car
you are restoring had wire wheels, then you will need to put on new hubs for
bolt on wheels to switch to the original steel wheels.
Vroooom vrooom,
John
Erika the Red
----- Original Message -----
From: <healeymanjim@joimail.com>
To: "healeys" <healeys@autox.team.net>
Sent: Sunday, November 05, 2006 9:03 PM
Subject: wheels
> does anyone on list know where i can get the type of wheels like the ones
> on the bn7 on the cover of the november AH mag. i ordered a set from VB
> and they will not fit on the front of my drum brake disc wheel bn6. seems
> there is a stepdown from 3inch to 2.5 in the hub and it will not fit over
> the hub on the car. had to send them back and am still looking. also
> looking for a wiring harness that is made for bn6(black with white tracer
> on main, yellow tracer on chassis harness.) any help will be
> appreciated. healeymanjim
|