I picked up an aftermarket, wood rim, Healey steering wheel a couple
of years ago. The wheel is banjo style, with an adjustible hub
inegrated into the assembly.
The problem is that it does not have the nut to tighted the wheel, and
the stock nut will not fit over the hub of this wheel as it is not
tapered at the base like the stock hub is. Any ideas how to make a
nut or modify a stock one to work?
Thanks
Patton
--
Patton Dickson - http://Austin-Healeys.com/
Austin-Healey 100-Six "Built to run 'til the road wears out."
|