Jim,
I'm having the same problem. From the looks of my original finish
pieces, they never sat flush with the top of the frame sill. I have
original trim and sills. The interior finish piece just lays lightly
on the Bristleflex. I have one and maybe two rocker panels that were
installed incorrectly. if you find anything out let me know.
Thanks
Dave and Daisy
BN7 II
On Oct 26, 2006, at 6:53 PM, rjh wrote:
> I am installing the shut face finisher set on my BJ8 and have found
> that the
> outside vertical finishing piece is about 1/2" taller than the door
> sill.
> Is this piece supposed to rest against the top of the door sill and be
> attached directly with small pointed screws? Any suggestions for
> filler
> material? Wood, key stock, foam? Or, leave it empty and attach the
> inside
> piece to the outside piece along the top edge.
>
> What is the correct vertical dimension for the outside shut face
> piece?
> Have some shut face finisher sets been on the market that are not
> dimensionally correct?
|