healeys
[Top] [All Lists]

Re: Car still won't start--Ditto

To: Healeys <healeys@autox.team.net>
Subject: Re: Car still won't start--Ditto
From: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Tue, 26 Sep 2006 18:48:23 -0700
I had the exact same thing happen last Saturday. Brand new wires, factory
Lucas cap & rotor. Car just quit running in the driveway.

Turned out the (Autozone ) coil went bad and ate the Pertronix.

I checked with Pertronix and they said this happens sometimes and there's no
way to protect against it as fuses defeat the purpose.

Here's my troubleshooting logic:

First I replaced the coil with a good coil off my wife's 240z--wouldn't
start. Replaced the rotor--ditto.

Then I put the old coil back and replaced the Pertronix with the points;
replaced the rotor to the original one.

Car ran but with a bad miss. Checking the coil with the timing light the
miss was easy to detect.

My cutoff switch wire is not hooked up.

Replaced the z-car coil onto the Healey now with points--runs fine.

Z-car doesn't run worth a damn though, without a coil :-(.
-- 
Steve Gerow
Pasadena CA
59 BN6
Positive Earth




<Prev in Thread] Current Thread [Next in Thread>
  • Re: Car still won't start--Ditto, Steve B. Gerow <=