The drums on my BN4 are this way as well. If I remember right each
one's fin is a different lenght.
Patton
On 9/5/06, HealeyBN7@aol.com <HealeyBN7@aol.com> wrote:
> But - on the one drum the fin
> runs only about 180 degrees around and looks like it was nicely machined off
>and
> then the drum painted. On the other side, the fin runs almost all of the
> way around, except for maybe 30 degrees or so. Is this factory balance? If
>it
> is, they must have discontinued it by the time it got to the 3000's. Wonder
> why, other than of course the cost.
>
>
--
Patton Dickson - http://Austin-Healeys.com/
|