Esko
Did you take the free play out of the spring loaded levers where the cables
attach to the SU's? It seems to me that each cable needs to be bottomed out
in the cross-bar, then pulled toward the carb and attached with the free play
minimized. All this should be done without the cable from the dash knob fixed
to the cross bar. The cross bar should be forward as far as possible at this
time. The free play I refer to is that the spring loaded levers on the carbs
move quite a bit before they actually have any actual effect (ie: lower the
jet and lifts the throttle). The last thing to do is to fix the pull knob
cable to the cross bar. I could be all wet, but this is the way I see it!
Ken Mason
BJ7 in work
----- Original Message -----
From: Esko and Megan Cate<mailto:ptenmcate@cablespeed.com>
To: healeys@autox.team.net<mailto:healeys@autox.team.net>
Sent: Sunday, July 16, 2006 12:03 PM
Subject: Choke pull length?
On a BJ7, how far out should the choke knob come to be fully choked. Mine
only comes out about half an inch. It is my understanding that it should
come way out and have a half way point that is just a bit of throttle, for
warm up period. Thanks
Esko
|