OK everyone. Here's the deal. The list CANNOT accept photos, attachments,
etc. However, I have a spare page on www.healey6.com called My Library that
I have not had time to use for posting of my library.
I will volunteer this:
If someone wants to see a photo, email it directly to me at ahbn6@optonline.
I will post it. Since I have no real life, I usually will be able to post in
a couple of hours.
John Sims, BN6
Aberdeen, NJ
www.healey6.com
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of John Harper
Sent: Wednesday, July 12, 2006 5:30 PM
To: Rich C
Cc: gardner5@comcast.net; Healeys
Subject: Re: Engine code
Rich
I am always keen to learn more. Could you please send me a copy of the
attachment that was removed by 'autox'. Better still, would be a copy on
a WEB site so that all can see it.
All the best
>Joel,
>Here is a picture close up of the casting date on the first production car,
>Body 24, car number 138031. It reads 22.7.52.
>This is on the lower right side and would be hidden when the starter motor
>is bolted up. I'm not sure if this practice continued into later production
>because in checking the engine block of a July '54 production BN1, the
>number reads 25.6.Z which may or may not be some sort of date code. Note
the
>screw heads at either end of the date tag so it can easily be changed on
the
>pattern. These screw heads are also evident on either end of the 25.6.Z.
>
>Hope this helps.
>
>Rich Chrysler
|