John,
I took mine to a professional auto glass installer. He didn't like the
looks of the seals I provided - AH Spares - for either the windshield, door
glass or the ventilators. I know he disn't use the seal material for the
ventilator glass - too thick. I assume he used the rest of the seals
provided. If anything goe badly in the future I'll have him to "fall back
on". The total bill was expensive - just under $300 - but I look at it as
professionally done work and good insurance.
Richard Bittmann BJ7 Tacoma
----- Original Message -----
From: "john close" <f9cougar@yahoo.com>
To: <healeys@autox.team.net>
Sent: Sunday, July 02, 2006 10:29 PM
Subject: Replacing Windshield Glass, BN6
> Hello Listers - My windscreen developed a mysterious
> crack, apparently all by itself, so I amy replacing
> the glass. Having removed the frame from the glass, I
> find that the glazing seal I originally used is much
> thinner that the roll I just got from Moss. I don't
> think I'll be able to get it back together if I try to
> use the thicker seal. Have any of you a source for a
> thinner windshield glazing seal? Thanks - JRC
|