Mike
I only have to look at PICT3267.jpg of the bell housing looking from the
engine end to confirm that this is not a BN2 bell housing. Without
looking at all the detail I would say that the rest of the gearbox also
comes from a 6 cylinder car. Others will no doubt be able to identify
the precise box accurately.
I might add that this gearbox appears from the photos to be in very good
order.
All the best
>Hello folks. This is a follow up to my recent thread on the
>transmission from my BN7. To refresh, it is a side shift from my BN7
>but has a BN2 tag on it. It will be mated to a BJ8 engine. There is
>some confusion as to whether this is a BN2 box that was put in the car
>at some point, or a proper box for the BN7 from the factory using a
>leftover BN2 casing. From the earlier posting I have learned that some
>other listers have similar situations where their MKI cars have the BN2
>tranny label - some with a 7 stamped over the 2. The following link
>will show a bunch of pictures of the gears and one of the bell housing.
>For those interested... http://www.pbase.com/mdlempert/tranny
>
>Regards,
>Mike L.
--
John Harper
|