I have had success w/ having the old sending unit rebuilt by Mo-Ma in
Albuquerque MOMANM@aol.com . Also, at a Tech Session a few years ago, a
vendor who is a local M+++ supplier said not to waste time ordering
replacement sending units because the quality is terrible.
John Snyder
> Hi All, my neighbor has had two faulty new sending units in a row from
> M+++ through a local supplier. His BN2 has the proper gauge and it
> checks out to be good using the information and procedures that have
> been posted on this list in the past. His wiring is new and checks out
> to be properly installed. He added an extra ground wire from the unit
> to the chassis. The problem apparently lies with the Asian sending unit
> itself. That is, the gauge shows 1/4 full when the tank is known to be
> 3/4 full, for example. Other gauges known to work well in other Healeys
> have been substituted with the same results as his gauge. Does anyone
> know of a source for "Good" sending units?? It seems returning it to
> his supplier means only that another crummy unit will be sent as a
> replacement. Help from this awesome list would be greatly appreciated.
> Jack
|