Mel -
That should fix it!!!
Cheers,
Alan
'53 BN1 '64 BJ8
On 3/19/06, Mel Brunet <mburnet@tampabay.rr.com> wrote:
> Listers
>
> After I took my valve cover off I discovered that 2 valves ( Inlet valve #4
> piston and Exhaust valve #5 piston) are not working due to the locking nut
> that goes to the rocker adjusting screw had come off and both were laying on
> the head. After these two valves are adjusted and properly secured I think
> I can attempt to adjust the SU's.
>
> Thanks again to all the responses, this list is very helpful
>
> Mel Brunet
> 67 BJ8 39749
> Land O Lakes, Fl
>
> [demime 1.01d removed an attachment of type Image/gif which had a name of
>BackGrnd.gif]
|