To: | "Greg Lemon" <glemon@neb.rr.com> |
---|---|
Subject: | Re: Oil All Over the Floor - 2 |
From: | "Charley Braum" <cbaustin@verizon.net> |
Date: | Thu, 09 Mar 2006 17:09:39 -0500 |
As a sidelight to this thread, when changing over to a spin-on filter you can do a quick test to check the efficiency of your oil pump. Make sure at least one of the bolts holding the adaptor to the block is not tightened all the way - then start the engine, rev it up, then shut it off - if you get between 1 and 3 quarts of oil on the floor - the oil pump is likely OK. If you get more than 3 quarts, you may want to de-tune the oil pump. Good luck and good night, CB |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Mounting a british plate on the front bumper question., Taylor Maurer |
---|---|
Next by Date: | Re: glove box lock, sooch |
Previous by Thread: | Mounting a british plate on the front bumper question., Taylor Maurer |
Next by Thread: | Re: Oil All Over the Floor - 2, Mark and Kathy |
Indexes: | [Date] [Thread] [Top] [All Lists] |