Mark,
We would have to know your chassis number to zero in on the actual features,
therefore the wiring loom tracer colours of your main harness.
However, your original question was regarding the loom in the trunk. There
you will have the last couple of feet of the main chassis harness (front to
back of the car) coming in through the trunk bulkhead. This should be black
with a single row of yellow tracer threads on the BT7 and blue threads on
the BN7 because of the differing positions of the battery cutoff switch.
This is turn will plug into the rear harness going across the back of the
boot area which apparently should be plain black.
Rich
----- Original Message -----
From: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
To: "Rich C" <richchrysler@quickclic.net>; <healeys@autox.team.net>
Sent: Saturday, September 24, 2005 10:22 PM
Subject: Re: Wire Harness Tracer
> Thanks Rich for your reply, I probably should have mentioned that
> I have a BT7. My harness came from from British Wiring and I assume
> they know what
> their doing since so many seem to recommend them.
>
> Should the harness still be black?
>
> Mark
>
> ----- Original Message -----
> From: "Rich C" <richchrysler@quickclic.net>
> To: "Mark and Kathy" <mgtrcars@galaxyinternet.net>;
> <healeys@autox.team.net>
> Cc: "Bob Haskell" <rchaskell@earthlink.net>
> Sent: Saturday, September 24, 2005 11:29 AM
> Subject: Re: Wire Harness Tracer
>
>
>> Mark,
>> No.
>> Actually black with blue tracer was on the main harness of the earlier
>> BN2.
>> The boot area on a BN2 I believe should be solid black.
>>
>> FWIW the tracer colour and pattern was unique to each edition and change
>> made to the harnesses from the eaeliest cars. For instance an early BN1
>> was
>> solid black throughout. As soon as a change was introduced, a tracer
>> colour
>> was introduced into that portion of the harness. The pattern of the boot
>> harness was unchanged through the life of the Hundred, therefore that
>> portion remained solid black.
>> We had been putting up with a "token" yellow tracer on harnesses for many
>> years. Today we can get the correct harness and tracer colours from most
>> of
>> the better suppliers.
>> Rich Chrysler
>>
>> ----- Original Message -----
>> From: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
>> To: <healeys@autox.team.net>
>> Sent: Saturday, September 24, 2005 10:07 AM
>> Subject: Wire Harness Tracer
>>
>>
>>> My new wire harness has a "black with blue" tracer for the rear trunk
>>> area.
>>> Is that correct? I thought they were all "black with yellow". No?
>>>
>>> Mark
|