Hi Allen,
Excepting the early BN1's:
No, just the opposite to the knockoffs. The LH side is a LH thread,
turns cw to loosen. The RH side is a RH thread, turns ccw to loosen.
The loosening forces at work on the hub nuts & the knockoffs are in
opposite directions.
You must have them pretty tight by now?
Dave Russell
BN2
Allen C Miller, Jr. wrote:
>
> I am assuming the locking nut is undone the same way knock-offs are
> turned . Is it correct to undo the left CCW and the right CW (i.e.,
> top of nut turns toward front on each side, bottom towards rear)?
>
> Allen
|