For their competition bars
Moss 280-915 3/4 in bushing MGB
They don't list it for the Healey in their catalog or web site, but is
is the correct part for both MGB and Healeys since both use the same strap.
Their sway bar kits do not seem to come with any bushings.
Michael Salter wrote:
>No. The MGB anti roll bar is the same diameter as the standard one on a 100M
>- BJ8 Healey. 3/4" bushings are specials which may be in Moss's 454-948 kit.
>
>Michael Salter
>www.precisionsportscar.com
>
>-----Original Message-----
>From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
>Behalf Of Tracy Drummond
>Sent: Sunday, April 24, 2005 7:48 AM
>To: Tracy Drummond
>Cc: healeys@autox.team.net
>Subject: Re: 3/4 inch sway bar bushing interchangability
>
>Found the answer. Yes it is the same part.
>
>Tracy Drummond wrote:
>
>
>
>>Are the two bushings for a 3/4 inch (uprated) sway bar on a Big Healey
>>the same as that on an MGB? These are the bushes that go on the front
>>frame caps.
>>
>>I have a sway bar on it's way but will be needing 3/4 inch bushes to
>>replace the 5/8 ones that came stock.
>>
>>Tracy
>>
>>1960 BT7
|