Mark -
I'd spend the C-Note and make sure to get SS caliper pistons. You can
buy them for only $20 a piece from the UK www.ahspares.co.uk. You'll
never have a problem again with your brake pistons if you do. Might
as well while it's all apart.
Cheers,
Alan
'53 BN1 '64 BJ8
On Fri, 18 Mar 2005 00:00:23 -0800, Lisa and Mark <bugtop@comcast.net> wrote:
> Hello all,
> Thought I'd try my luck to see if anyone has a set of good used Front
> Caliper pistons for a late model BJ8 they'd like to get off their
> shelf. I'm rebuilding my front calipers and my pistons have pitted
> rust areas. Just thought I'd check before plopping down another
> hundred. If you have some that are good send me an email.
>
> Also here's a tip I used today to clean out the dust boot groove, I cut
> some stiff emory paper in the circumference of the piston and used that
> in the groove to remove some of the surface rust in the groove.
>
> Cheers all,
> Mark Buggy
> '67 Bj8
> bugtop@comcast.net
|