Rich,
Know of anyplace there is a picture on the web of this inner aluminum trim
piece? I want to be sure I have it positioned properly...
David W. Jones
'62 Mk II BT7 tricarb
Cumberland, RI USA
----- Original Message -----
From: Rich C
To: Brett Bonner ; healeys@autox.team.net
Sent: Monday, March 14, 2005 10:53 AM
Subject: Re: BN6 Aluminum Door Shut Trip - 2 or 3 piece?
Brett,
The BN6 had 3 pcs. per side. The inner ones have a lip that goes over the
furflex portion of the door threshold seal to lock it into position on the
horizontal alloy top edge. You may not have had them with your car if the
carpets or door seals were ever replaced. They may have been removed and not
reinstalled.
They are available seperately from AH Spares (part numbers DRF107 and
DRF108), may be available from others.
See picture att'd.
Get the new "Bristleflex" seals from MacGregor. They are the only ones that
will grip the flanges properly, fit, and stay on.
Rich Chrysler
----- Original Message -----
From: "Brett Bonner" <bbbonner@fedex.com>
To: <healeys@autox.team.net>
Sent: Monday, March 14, 2005 9:41 AM
Subject: BN6 Aluminum Door Shut Trip - 2 or 3 piece?
>I have a 58-59 BN6 S/N 23__. Does the car have a 2 piece aluminum trim
>door
> shut set or 3 piece? I find it odd that I have the shut pillar trim and
> the
> outside sill trim for both doors in my inventory, but not the inner trim
> pieces. I don't think I misplaced the inners . . .
>
> Any help would be appreciated. I hope I can just get the inner piece. I
> would like to order the appropriate pieces today and the appropriate door
> seals.
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010048.JPG]
|