Sam,
I'll get back to you later today, complete with pictures. I know, listers; I
can't send pics to the list.
Rich Chrysler
----- Original Message -----
From: "Sam Marble" <samncyna@comcast.net>
To: "healeys" <healeys@autox.team.net>
Sent: Tuesday, February 08, 2005 11:25 AM
Subject: Installing Heritage door pannels
> Listers:
> I'm now looking at the pannels supplied by Heritage for doing the door
> of a BN4 (late) . I'm having trouble figuring out the right approach
> and sequence for installing the inner pannels.
> The lower pannel they supplied is a little different that what was in
> the car. The old pannel I removed had a flap sewn along near the
> bottom which acted as the inside bottom of the door. The new pannel
> has a loose length of vinyl whih looks like it should be glued to the
> bottom inside of the door. There is also a third piece which looks
> like it should lie on the bottom of the door but I'm not sure if it
> shoud be attached or used, somehow, with the loose vinyl.
> I'm also a little concerned on how to get the upper and lower pannels
> in to the door without damageing them. It looks like they could easily
> crease if bent too much.
> I can see that the bottom should go in first but this is the one that
> looks to be more trouble to get in.
> Is there a trick or proper sequence to follow here ?
> The photos supplied by Heritage only show the finished product and
> don't give any clues to the fitting process.
>
> Thanks for any help in advance
> Sam
|