sears -- craftsman -- makes a 1 11/16 3/4" drive socket which requires a 3/4
to 1/2 adapter.
jerry wall BN6
Don wrote:
>
> I have always used a 1 11/16" spanner on my Six, seems to fit perfect.
> Don
> 57' BN4
>
> -----Original Message-----
> From: owner-healeys@Autox.Team.Net [mailto:owner-healeys@Autox.Team.Net]
> On Behalf Of Greg Lemon
> Sent: Friday, January 28, 2005 9:48 AM
> To: David Schweninger; healeys@Autox.Team.Net
> Subject: Re: Healey Crank Nuts (Metal Type)
>
> I use an 1 3/4" on mine and it works fine, maybe just slightly too big,
> but
> on that big a nut I don't think it will strip. I have a 4 cylinder,
> don't
> know if the sixes are different.
>
> Greg Lemon
> 1954 BN1
>
> ----- Original Message -----
> From: "David Schweninger" <quenty@ntelos.net>
> To: <healeys@autox.team.net>
> Sent: Friday, January 28, 2005 10:38 AM
> Subject: Healey Crank Nuts (Metal Type)
>
>
> > Tim and Steve
> >
> > My crank nut measures 1.665 across the flats. This is about .020 less
> > than 1" 11/16 (1" .6875). My 12 pt. 1"7/8 socket was too big and the
> > 1'5/8 is too small.
> >
> > Dave Schweninger
> > BN7-II
>
> Your messages not reaching the list?
|