Re: Hot Cam question for discussion

[Eric (Rick) Wilkins <wilko2@cox.net>]

One valve on a Healey (and many other cars) is actually over the edge 
of the cylinder. Small notches need to be cut on the top edge to clear 
the valve.

Go here for a pic of an MGA block with cuts:
http://mgaguru.com/mgtech/power/cm202a.htm

Rick
San Diego

On Jan 18, 2005, at 9:48 AM, RAHosmer@aol.com wrote:

> Rick,
>
> Please help me, I'm lost here - what would you (have to) cut on the 
> block,
> due to a milled head? Notching pistons I could understand.
>
> Dick Hosmer
> 62BT7