Ron,
I didn't see any numbers on mine. I went thru this several years ago when I
replaced my harness. There are two versions of the same regulator; one with
screw-ins and one with spades (both different from the BJ8). AFIAK, this is
the only difference. Our cars originally had the screw type, but the spade
one works fine in my car; I just added spades to the harness.
Neal G.
61 BT7
-----Original Message-----
From: owner-healeys@Autox.Team.Net
[mailto:owner-healeys@Autox.Team.Net]On Behalf Of Ron Fine
Sent: Saturday, December 18, 2004 11:09 PM
To: Healeys@Autox.Team.Net
Cc: joemulqueen@yahoo.com
Subject: Voltage Regulators for BN7
"My voltage regulator has spade type connectors and my wire
harness doesn't. A friend advised me that the connectors should be
screw-in."
|