Hi Randy,
A recommendation.
What ever you use to adhere the shroud, do so sparingly. I recently
attempted to remove a front shroud from a car for collision repair. This
shroud had been adhered with some sort of construction adhesive and it was
impossible to remove.
We had to cut the shroud and graft a new forward section on because we could
not remove the damaged one.
Michael Salter
www.precisionsportscar.com
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of dicksonr@uwm.edu
Sent: Tuesday, December 14, 2004 1:49 PM
To: healeys@autox.team.net
Subject: front shroud adhesive, air duct questions???
I'm about to attach the front shroud on my BJ-7 and I was wanting to know
what
kind of mastic, adhesive or whatever, if anything, that I need to glue it
down
to the chassis.
Also, how far out of the vent hole in the front(right side) of the car does
the
air ducting protrude? Is there anything that holds it in place? Lastly,
what
color is the inlet vent (tube with valve) in the front (left side) of car?
Is
it body color or flat black? Thanks in advance.
Randy Dickson
Healey Archaeologist
63 BJ-7
|