| To: | "HealeyList" <healeys@Autox.Team.Net> |
|---|---|
| Subject: | Re: seat slides |
| From: | "Richard Bittmann" <edmyed@harbornet.com> |
| Date: | Thu, 9 Dec 2004 08:23:32 -0800 |
I just re-checked the location of bolt holes on the chassis and on the seat frame. The center to center dimension of the seat frame holes is 13" from center of round hole to center of slotted hole opposite. The center to center of chassis floor holes is still 13 1/8". The hole diameter is 7/16". Richard Bittmann BJ7 |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Lister with Rear Carb Spitting Back, Bob Spidell |
|---|---|
| Next by Date: | RE: rear end growl next step, Freese, Ken |
| Previous by Thread: | Lister with Rear Carb Spitting Back, Bob Spidell |
| Next by Thread: | Re: seat slides, John Loftus |
| Indexes: | [Date] [Thread] [Top] [All Lists] |