John -
The metal cancelling ring should be installed with the
cancelling tab at the very top (i.e. behind the turn
signal lever when the steering wheel is in the
straight ahead position). If it's off to one side, it
will cancel when turning one way but possibly not the
other.
Another fix is to bend the tab in slightly.
Regards,
Alan
'53 BN1 '64 BJ8
--- John O'Brien <banjojohn@cox.net> wrote:
> Hi Listers:
>
> After a long hiatus I have returned to the list. I
> didn't have time to sort
> through all the mail in my box each day, so I gave
> up and signed off. No
> reflection on the list, just too little time. I've
> got a small winter
> project I could use some input on.
>
> My BJ8 turn signal switch would not cancel as it is
> designed to. I bought
> another one and installed it (a real pain to get the
> wired through the tube)
> It started acting up soon and finally popped apart
> into my lap mid-turn one
> day. I could not get is back togethr because of
> some damage and the way
> they put them together, so ordered another. This
> one has worked OK for a
> while but now does not cancel for left turns. Any
> advice on how to adjust
> this so it will work again?
>
> Thanks in advance
>
> John O'Brien
> '65 BJ8
> "61 Bugeye
|