Just put some heat on it. Sure, you will ruin the seal, but you need to
replace it anyway. I use a torch to get it hot, then put pressure from a
puller on it, one wack w/ a hammer, and it pops loose.
John Snyder
> Would you, or anyone on the list, know of quality pitman arm puller that
> would fit/work on Big Healeys? To preserve the peg on my BN4 steering box
> I resorted to slitting the drop-arm with a disc cutter to release it.
> Everything else had failed. I am now putting off the moment when I tackle
> the same job on the idler!
|