> How interchangeable are the original front shrouds from Healey to
Healey? Is
> this another area of slight variances between cars, or is the fitment
> quite
> uniform?
I replaced a shroud with a used original from another car. the rivet holes
on the cockpit edge of the shroud as well as the screw holes on the hinge
side of the hood opening all lined up nicely.
The holes used to mount the windshield are off by half the size of the
hole.
I don't expect this to be a problem in final assembly as I have a drill.
I still have the first shroud if needed. needs repair
Kevin Rogers
60 BN7
----- Original Message -----
From: "Diann Jones" <diann.lindsay@xtra.co.nz>
To: <healeys@autox.team.net>
Sent: Tuesday, November 09, 2004 4:07 PM
Subject: Front Shroud - Original versus Reproduction
|