Fired up the engine yesterday what a sound. After warm up seemed to
develop air leak in rear carb and I had to richen it up significantly to
keep it running, and dieseled significantly when shut off. What is the
correct gasket sequence from intake manifold to carb with a heat shield
installed. Also does anyone know where to get new heat blocks. Not sure
what else to try, assuming I rebuilt carbs correct, but seemed to
function fine until warm up, with initial setting about 1 < turns.Timing
set about 8 btdc and advance about 45 degrees @ 4000rpm. Kurt L Mass
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|