Michael -
Yes, you need the phenolite spacers to properly space
the carbs so that you can attach the original H4 float
bowl supports to your car. The size you need is ... I
think ... 1/4 inch thick (it might be 1/2", I don't
remember). You also need the spacers so that there
are no travel problems with the throttle linkage.
You can get the right spacers at all the usual
suspects such as:
www.sumidel.com
www.britishcarspecialists.com
www.cape-international.com
I bought mine at cape... but if you want to use a US
supplier "british car specialists" will know the right
size and type.
You should note that the prices on the su midel site
are in Australian Dollars, so prices are 30% lower
than what you think.
Regards,
Alan
--- Michael Williams <mewilliams@comcast.net> wrote:
> Listers,
>
>
>
> I have installed my new M header and LeMans
> manifolds but I have a question.
> Should there be a spacer piece between the manifold
> and the H6 carb like
> there is with the H4? The kit didn't come with any.
>
>
>
> --Michael
>
> '55 BN1 LeMans (almost)
|