Thanks to John Snyder and Eric (Rick)Wilkins for getting answers to my BN7
questions.
The "cups" are readily available from Kilmartin under their numbers AH289L
and AH289R. These are the steel parts only and the wood needs to be made up
to fit within.
Rich Chrysler
----- Original Message -----
From: "John Snyder" <helyjohn@cablespeed.com>
To: "Rich C" <richchrysler@quickclic.net>; "Healeys"
<healeys@autox.team.net>
Sent: Saturday, July 17, 2004 9:51 PM
Subject: Re: BN7 Help Needed
> Hi Rich,
>
> I made a pattern for my first BN7 MK2 off the fenders b/4 the body panels
> went to the shop because I was afraid they would lose these holes.
>
> From leading edge of the fender = 4 1/2" back
>
> From fender bead edge = 11/16" out
>
> I have never yet had a BN7 come to me w/ the top bow "cups". (How can you
> lose something that big?) I make my own.
|