Perhaps I have the rubber sealing strips placed wrong. I have them glued to
inside edge front and back so that they seal on horizontal flange on front
fire wall and on rear metal tunnel. Is this correct?
Sid
----- Original Message -----
From: "Freese, Ken" <Ken.Freese@Aerojet.com>
To: "'Sid Bronson'" <bron@rmci.net>
Sent: Thursday, July 01, 2004 4:56 PM
Subject: RE: BJ8 Trans tunnel
> Sid,
> The screws do not go through the carpet or the jute padding. The tunnel
> carpet sits on top of the screws. The floor carpet sits on top of the
tunnel
> carpet.
> Ken Freese
> 65 BJ8
> >
>
> Listers,
>
> I am installing trans tunnel with new seals front and rear as well as
along
> floor board edge. Do the mounting screws go thru the carpet and pad then
> into
> the floor or directly onto the metal floor. With the new seals the tunnel
> seems to be about a 1/4 " from meeting the metal floor.
> Thanks,
> Sid BJ8 65
|