Yes the bent rod on the bottom of the frame goes into the rubber clip behind
the drivers seat.
Under the slider on the inner fender well there are two 1/4 28 threaded
inserts. That is where the bracket attaches that holds the clip.
--
--
David Nock
NEW E-mail Addresses!!!
David Nock, Technical Questions healeydoc@sbcglobal.net
Sheila Nock-Huggins, Parts Questions britishcardoc@sbcglobal.net
British Car Specialists 2060 N. Wilson Way Stockton CA 95205
Phone 209-948-8767 fax 209-948-1030
http://www.britishcarspecialists.com
on 6/28/04 12:05 PM, Patton Dickson at kpdii@earthlink.net wrote:
> Same here, my car lacks these as well.
>
> Is this what the hook that extends from the bottom of the top bow is for?
> The hook for my bows is also missing. The rest of my bows are fine, and I
> only know that the hook was supposed to be there after comparison with other
> cars. I am thinking that I could have a hook welded back on.
>
> A fellow member of the Gulf Coast Healey Club and I were wondering what the
> hook was for at the last meeting.
>
> Patton
>
> Patton Dickson - Richmond, TX
> '57 A-H 100-Six - http://Austin-Healeys.com
> Please see my parts wanted list at the site...
>
> -----Original Message-----
> From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
> Behalf Of djjob@noos.fr
> Sent: Monday, June 28, 2004 3:16 PM
> To: healeys@autox.team.net
> Subject: early BN4 top
>
>
> Now I know why erecting my top is more difficult than it should be.
>
> I dont have the rubber blocks on each side which the erected frame clips
> into as mentioned by Dave Nock.
>
> Where exactly do these fit?
>
> regards
>
> Derek
> www.healeysix.net
|