Hi Bob,
With all due respects, you are making a simple job very complex.
With the ignition on if you join the 2 wires which go to the brake light
switch together the brake lights should come on.
If they do then the rest of the circuit is OK and the fault is in the
switch.
Michael Salter
www.precisionsportscar.com
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net]
On Behalf Of Bob Johnson
Sent: Thursday, June 03, 2004 7:41 AM
To: Healey List
Subject: brake light switch
After replacing the wiring harness, I still have no brake lights):-(
Using an
ohmmeter on the brake light switch, the switch works...it shows a
circuit, but
it does not show a dead short when the brake pedal is pressed. There is
some
resistance across the switch. Is this OK, or is this why I don't have
brake
lights?
Thanks,
Bob Johnson
BJ8
|