May I also suggest a small wad of dum-dum around each stud before
installing. Seals the hole. Carefully remove the excess squashed out onto
the trunk lid.
Keith Pennell
> I use a 1/4 drive screwdriver with the approprate size socket to push them
> on, usually the script will need a little bending to lay flat. It is made
> of pot metal and can be bent to the curvature of the boot lid. Use care
and
> Ive found once the script is bent properly the holes usually will accept
the
> studs better. This is especially true of a newly painted surface as you
> wont be putting unwanted pressure causing paint to blister around sharp
> edges.
>
> Carroll Phillips
|