Hi Mike Salter,
Hate to beat this Dead Horse up too much more but Its nice to get
this straight in ones head. So you think there is still air in the
system, rather than an intermittent hang up of the clutch plate even though
it worked for awhile.
So after the system worked for awhile it accumulated enough air to
basically shut down. Is that what you mean by "system failure".
Thanks, Mark
----- Original Message -----
From: "Michael Salter" <msalter@precisionsportscar.com>
To: "'Scott Willis'" <ahpowered@hotmail.com>; <healeys@autox.team.net>
Sent: Friday, April 30, 2004 6:17 AM
Subject: RE: 60 BN7 Gearbox tunnel removal
> Hi Scott,
> In your message you say " and it stopped working a couple times." That
> would suggest that on some occasions the clutch would disengage and on
> others it would not.
> If that is in fact the case the clutch disc is definitely not stuck to
> the flywheel and the problem is much more likely to be in the operating
> system.
>
> Michael Salter
> www.precisionsportscar.com
|