Greg,
Thanks for the concern, but, too late now. It looks good. The color
actuall matches the original finish very well once in the car. Don't
know if it will yellow any, but the originals did, so I'll be real close
to original finish then. It was easy enough, I can refinish it if it
ever looks bad. Since the car is garaged, I don't think it will go bad
in the next several years. By the way, this stuff has very little odor
to it. a plus when working in the house.
Thanks
Dave
Greg Wilkinson wrote:
>Hi Dave,
>I bought some polyester resin at a plastics store for my dash. They said that
>epoxy had a tendency to yellow in sunlight. I hope what you got doesn't turn,
>but you might want to check it out before reassembly.
>
>Best,
>Greg
>67 BJ8
>
>
>>From: Dave Carpenter <d.carpenter7@verizon.net>
>>
>>Looked great, so I poured Famowood epoxy clear coat on. Home Depot $17,
>>enough to do five or six dashes. Make sure the temperature is within mfg
>>specs or it will get cloudy or mottled.
|