My recollection (I can't find it in writing) that this crack is common
and not a big deal. Don't try to repair it.
For reference, here's a page on engine building tips largely from my
Dad. For racing we strap the center main, not sure it's needed for road
use.
https://tonydrews.com/uncle_jacks_engine_building_tips.htm
Regards, Tony Drews
On 5/27/2026 2:54 PM, Brian Ray wrote:
> Good afternoon, FOT,
> I have this crack in the bridge between cylinders 2 and 3. Is this something
> I would have to consider replacing the block for? I am building this to a
> fast road specification. With that said, should I also bridge or strap the
> center main bearing cap? Any guidance is appreciated.
> Thank you,
> Brian Ray
>
>
>
>
>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|