Nick, we usually weld up the damaged area & then
either have a machinist mill the area down flat or
grind it flat and smooth with a die grinder and a
mounted stone. We have had great success doing this.
almost every wet liner TR engine need this repair if
there are very many miles on the engine.
Regards,
Greg Solow
The Engine Room
Santa Cruz.
------- Original Message -------
>From : Nick Black via Fot[mailto:fot@autox.team.net]
Sent : 8/14/2022 6:24:48 PM
To : fot@autox.team.net
Cc :
Subject : RE: [Fot] TR4 front engine plate = wanted
fellow triumphistiI've been playin with TR's most of
my life and as such have accumulated more than a
bunch-o-parts. But, wouldn't ya know, I don't have a
decent front engine plate in the bunch!So, I need a
front plate that isn't torn up and gouged by the
chain tensioner.Anyone have a good front engine plate
for a TR4 that they want to sell?Lemme no,Nick in NorCal
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
|