Thanks for all of the responses to my question on tube shock conversions. I
forgot to add that last summer I installed the Richard Good C/V joint half
shafts, rear hubs, Nylatron swing arm bushings and a R200 LSD differential.
Thus wasnâ??t done to reduce wheel hop and skittering in the corners though but
I did get rid of the half shaft spline lockup exiting corners! The pinion seal
had failed which trashed my original differential.
I wonder if replacing the shock oil with a higher viscosity fluid would be a
good first step. It never occurred to me that stiffer shock action would help.
It sounds like I should just get my lever shocks rebuilt.
Thanks,
Dave Connitt
Sent from my iPhone
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|