Thanks Charly. I sure looks like the one I have but I will order 6. Two
for each day of the Historics... And yes, I will order a new rear mount
as well.
On 6/6/2018 6:52 AM, Charly Mitchel wrote:
> I believe this is the one needed:
>
> http://www.crossaxledcustoms.com/land-rover-series-2-ii-2a-iia-3-iii-2-25l-petrol-diesel-nrc2054-engine-motor-mount/
>
>
>
> You should also check the rear mount.
>
> Charly Mitchel
> TR6 #44
>
> ----- Original Message ----- From: "van.mulders.marcel--- via Fot"
> <fot at autox.team.net>
> To: "Alec Buchan" <agb at compsnw.com>
> Cc: "fot" <fot at autox.team.net>
> Sent: Wednesday, June 06, 2018 1:02 AM
> Subject: Re: [Fot] Beaten by equipment...Pacific NW edition.
>
>
>> I fitted Land Rover engine mounts, and a fixation at the top of the
>> engine. The engine mounts of an off road car are supposed to be very
>> strong.
>> Marcel
>>
>> ----- Oorspronkelijk bericht -----
>> Van: "fot" <fot at autox.team.net>
>> Aan: "fot" <fot at autox.team.net>
>> Verzonden: Woensdag 6 juni 2018 02:47:41
>> Onderwerp: [Fot] Beaten by equipment...Pacific NW edition.
>>
>> I've got an issue...lots of issues, but this refers to my TR4.
>>
>> Raced in my first event of the year this past weekend at the Spokane
>> Festival of Speed (SOVREN)
>>
>> Car did well but in my third session, going down the back straight, over
>> a couple bumps, my throttle went wide open 'on its own'. Once back in
>> the paddock, we found that both front engine mounts had failed and the
>> engine dropped below the mount on the carburetor side, forcing the
>> throttle to its maximum position.
>>
>> These were brand new mounts as one failed at our Fall Finale, last
>> September in Seattle. Also, these two events are the only events I have
>> run my 'spare' motor which I picked up in CA last year. Engine seems to
>> do well but the combination of its torque, combined with the quality of
>> the mounts, is very frustrating. I tried to take a photo of how it
>> currently sits, but couldn't focus well enough. I am running the round
>> mounts, "Engine Mount Uprated TR4 TR4A (SKU 130985)" from a PNW
>> supplier. Three mounts in two events is not a good pattern.
>>
>> Any thoughts or alternatives is greatly appreciated.
>>
>> Alec Buchan
>> aka the Blue Caboose.
>>
>>
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/van.mulders.marcel at telenet.be
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/charly at mitchelplumbing.com
>>
>>
>>
--
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180606/7623e8e7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: emailsignature4.jpg
Type: image/jpeg
Size: 22639 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/fot/attachments/20180606/7623e8e7/attachment.jpg>
|
