Yes add another pin, it's SOP.
With 2 pins and 7/16 bolts to clamp it down, the flywheel isn't going anywhere.
Glen
-----Original Message-----
From: Mathieu W. Huovinen via Fot <fot at autox.team.net>
To: fot <fot at autox.team.net>
Sent: Sat, Dec 2, 2017 10:48 am
Subject: [Fot] Dowel pinning Spitfire crank/flywheel
Friends,
Long time listener, first time posting. I pulled the 1500 out of my Spitfire
#80 and I am in the process of building a 1296. I am staying with my 1500
gearbox and clutch/flywheel so I am at the point of having the race shop
(Abacus) machine the bolt holes from 3/8 to 7/16....and the topic of an extra
or even three extra dowel pins machined into the flywheel came up. What is
everyone's thoughts or even the standard for this? I was thinking at least one
additional pin in addition the to the stock one. Thanks in advance!
Mathieu Huovinen
910-619-2952
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20171204/15713624/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_8514-2 2.jpg
Type: image/jpeg
Size: 266590 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/fot/attachments/20171204/15713624/attachment.jpg>
|
