Hi,
I usually run a load of Rotella through an an engine that I've had apart, the
T1 straight 30 wt stuff. Anyway, I started the motor last evening and the
initial oil pressure was 60 or 70 PSI 2000 RPMs with cold oil (ambient was
about 80 F). This is different from the 80 - 100 PSI I get with 20w50 cold.
In any case, I'm dropping the pan to check the oil pump clearances, which I had
done earlier, but I wanted to see if these numbers seem "normal" or not.
Regards,Bob Lang339-927-4489
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170823/167c4b0d/attachment.html>
|