What is the size of the shaft on the Denso ??
Curious,
Bob T
stom make? Thanks
>_______________________________________
-----Original Message-----
From: Tony Drews via Fot <fot at autox.team.net>
To: John Styduhar <johnstydo at gmail.com>; Triumph 'Friends of Triumph <fot at
autox.team.net>
Sent: Thu, Jun 29, 2017 3:48 pm
Subject: Re: [Fot] Oversize alternator pulley source
I'm not sure of the shaft diameter on the Denso
alternator, but here's a couple of
possibilities. I think I'm running the first one.
https://www.summitracing.com/parts/sum-g3969/overview/
https://www.summitracing.com/parts/pwm-182/overview/
https://www.summitracing.com/parts/mor-64800/overview/
basically, search for "alternator pulleys" on www.summitracing.com
Regards, Tony Drews
At 09:20 AM 6/29/2017, John Styduhar via Fot wrote:
>I'm running a single groove Denso 55A alternator
>(Lester No. 14684) in my TR racer.? Pulley OD
>is 2 11/16". Does anyone know where to buy a
>larger diameter pulley for this unit or will I have to custom make? Thanks
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony at tonydrews.com
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170629/5ce4dba3/attachment.html>
|