fot
[Top] [All Lists]

[Healeys] FW: Front Hub Runout

Subject: [Healeys] FW: Front Hub Runout
From: sbyers at ec.rr.com (BJ8Healeys)
Date: Wed, 19 Apr 2017 13:09:17 -0400
I had heard Hemphill was back in business, but I had hoped it was only an
"alternative fact".
I don't know of any  good way of determining if the hubs are bad or not
except by installing them.  The only reason I bought from him in the first
place was that not too long before someone posted to the list that the hub
he bought from Moss was defective (bearing cavities machined oversize), and
I wanted to avoid getting one of those.  And I was passing by his place on a
business trip so it was convenient.  As it turned out, I replaced the bad
Hemphill hub with a good one from Moss.

Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC? 



-----Original Message-----
From: Bob Spidell [mailto:bspidell at comcast.net] 
Sent: Wednesday, April 19, 2017 12:33 PM
To: BJ8Healeys; healeys at autox.team.net
Subject: Re: [Healeys] Front Hub Runout

To my shock and awe, I was informed Hemphill is still in business (albeit
somewhat 'under the radar'):

https://www.facebook.com/HealeyHaven/

I've got a couple new hubs sitting on the shelf; is there a way to tell if
they're defective before installing (I don't have access to a lathe or
similar)?

Bob




<Prev in Thread] Current Thread [Next in Thread>