Tom,
Look through the illumination bulb hole and you'll see the aluminum
drag cup which turns when you turn the needle. Put your little finger
in through the hole and touch the drag cup so it can't move then
wiggle the needle off. You don't need anything to pry it off.
Andy.
On 4/14/17, Tom Felts <tomfelts at windstream.net> wrote:
> I need to pull the guts out of my speedo. Have removed (screws, etc and the
> push-counter end) Trying to get the face off it appears you need to remove
> the needle. How do you remove the needle (do you pry it off)---this will
> allow removal of the face so you can get the guts out.
>
> thanks
> tom
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/austinhealeyslist at gmail.com
>
>
|