[Healeys] Aluminum Gas Tank

[goldengt at cal.net (goldengt)]

I have 130000 miles on an aluminum tank. No sealer.Ken Freese?


Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: Bob Spidell <bspidell at comcast.net> 
Date: 4/10/17  7:43 AM  (GMT-08:00) To: healeys at autox.team.net Subject: Re: 
[Healeys] Aluminum Gas Tank 

    My immediate response would have been 'yes,' as I've sealed two
      new (steel) tanks with no negative results (one's been sealed for
      at least 20 years).? However, Hirsch's own FAQ says 'SEALER SHOULD
      ONLY BE USED AS A LAST RESORT'? (the whole doc is in caps).? So,
      if a company that has a vested interest in selling sealer doesn't
      recommend it, I wouldn't do it again, esp. with an Al tank, which
      should be more impervious to rusting (I believe Al forms a thin
      oxide layer on its surface anyway).
    http://www.hirschauto.com/sealer.pdf

    
    Bob

    

    

    On 4/10/2017 12:01 AM, Michael MacLean
      wrote:

    
    I have a new aluminum gas tank for my BN2. ?Can I use
      it as is, or should I use gas tank sealer before I install it?
      Mike MacLean
      
    
    

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170410/75aa2003/attachment.html>