I've done it on a BJ8 and a BT7 windshield and it's not hard to do. Make
sure that you have good corner brackets and the right length screws. The
hardest part is pulling the lower seal thru the T slot. Use plenty of liquid
dishwater soap and grab the end with vice grips to pull it.
Regards,
Charlie Schott
-----Original Message-----
From: Bob Spidell
Sent: Saturday, April 08, 2017 1:51 PM
To: Healeys
Subject: [Healeys] BJ8 Windshield Replacement
Listers,
Anyone replaced the windshield--just the glass and enclosing seal--on a
BJ8? I have new glass, would order the seal kit from Moss (part#
682-028), and have a 'pro' do the installation (unless this is easy
enough for a ham-fisted DIYer). I don't want to pull the whole
thing--wind wings and all--just the 'main' glass. Anybody done this, or
is it best to let the pro do it?
TIA,
Bob
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://autox.team.net/mailman/options/healeys/schottc at knology.net
|