From: timmmurphh at gmail.com [mailto:timmmurphh at gmail.com]
Sent: Wednesday, March 22, 2017 2:50 PM
To: 'STEPHEN BOROWSKI' <biznzman at pacbell.net>
Subject: RE: [Fot] TR4 Motor Mount Question
We at first tried the square ones from Moss and broke two sets of them, once
going into Canada Corner at RA and the throttle got open wide. Not good. Then
we got a set of round ones through Tony Drews from I think Cambridge in
England. That was about 8 years ago, and no problems. Strongly recommend
them. About $50 a set at that time but the postage is about $50 from England.
Maybe you can tie up with someone who also needs some parts from England. You
might try Steve Yott. I think he gets somewhat regular shipments in from
England.
Tim Murphy
TR4 #317 BRG
From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of STEPHEN BOROWSKI
via Fot
Sent: Tuesday, March 21, 2017 3:41 PM
Subject: [Fot] TR4 Motor Mount Question
Hello All,
Which is the better engine mount for racing, Rubber or Polyurethane? Round or
Square?
Transmission Mount?
Thxs. Steve
TR4 Racer
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170323/67e84f41/attachment.html>
|