Koni's can be rebuild by a Koni specialist. There are type numbers
engraved at the bottom of the Koni's, like e.g. 80-2155. They may still
being produced.
Using gas shockabsorbers will raise the car a bit.
Kees Oudesluijs
Op 20-2-2017 om 21:00 schreef Wayne:
> Hello,
>
> I am going to be helping a friend soon who has a BJ8 with
> the Koni front shock conversion. Both of his front shocks are leaking
> badly. Does anyone have a modern replacement part number? I think an
> adjustable gas shock would be the way to go. I can measure the full
> extended and retracted dimensions of the Koni shock and go from there,
> but I don't want to reinvent the wheel if someone already had part
> numbers to start with. Gabriel, Monroe, etc.
>
> Thanks
> Wayne
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/coudesluijs at chello.nl
>
>
>
|