Hi,
Try someone like this:-
https://www.parcel2go.com/
ie make your own shipping arrangements via a courier of your own choosing. I
use people off this site quite often when I think I?m about to be ripped off on
P&P.
I just got a quote for a spoof package: 500mmH X 300mmL X 200mmH at 9kilo. Pick
up UK, delivered USA, including ?Protection?(?). 4 days+ ETA.
?120:00 delivery to the US at a ?Take it or Leave it; we really don?t give a
stuff? rate is appalling. Unless it includes a huge amount of import dues. But
I imagine that those iniquities are handled separately in the US, just like
they are here?
Simon
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs
Sent: 13 January 2017 19:27
To: Neil Anderson
Cc: Healeys
Subject: Re: [Healeys] Belleville washers in BN2 steering box
I wanted to buy a luggage rack from England, They wanted 248 BPS for the rack
and 125 BPS to ship. I told them to find a cheaper way to ship or I would not
buy the rack. They told me too bad that was what it cost to ship. Other
suppliers have been willing to find a cheaper way to ship when I asked...
But no VAT applied :)
Ira Erbs
Portland,OR
_______ _______
(______ \____1959 BN4____/ _______)
(_________________________)
BT7 engine and disk brakes
A racing car is an animal with a thousand adjustments. Mario Andretti
Please excuse random auto corrects and misspelled words
On Fri, Jan 13, 2017 at 7:27 AM, Neil Anderson <neilandcustom at gmail.com>
wrote:
Bob,
FWIW, there would be no VAT on export orders from the UK, but shipping is
getting really expensive.
Neil Anderson
BT7
On Thu, Jan 12, 2017 at 11:04 AM, Bob Spidell <bspidell at comcast.net> wrote:
Well, I went ahead and ordered from Moss. I did a cursory check of the
interwebs didn't turn up anything of those dimensions here:
https://www.mcmaster.com/#standard-washers/=15uvd84
and here:
http://www.keybellevilles.com/bellevilles/sampleCatalog.php?gclid=CMCHjPHOuNECFQGRfgodVAoFuA
and others, and I need to get this car back together before I start losing the
little bits. FWIW, SC Parts and AH Spares have them at a more reasonable
price--esp. with the current exchange rate--but with VAT and shipping it's not
a massive savings.
My thanks to Olin, Bob and others who responded; if I come across these in this
size I'll make a note for future reference. Now, at least, I know what they're
for and how to stack them.
Bob
On 1/10/2017 2:14 PM, Olin Brimberry wrote:
Bob,
I figured height of the spring was also important, so I put 2 together and
measured the height with calipers
Height of 2 washers: 0.100 inches
Height of 1 washer: 0.050 inches
Thickness of washer: 0.025 inches
Checking the previous diameter dimensions with a caliper, I get:
ID: 1.057 inches
OD: 1.5 inches
I suspect that the ID is originally spec'd to be 1-1/16" but because of the
slight "spring", the diameter is slightly less. Good luck
Olin K. Brimberry, PE
Principal Engineer
obrimberry at hunterbane.com
Office - 919.803.4274 <tel:(919)%20803-4274>
Mobile - 919.522.1608 <tel:(919)%20522-1608>
HunterBane Engineering, PLLC
PO Box 10314
Raleigh, NC 27605
3306 Alamance Drive
Raleigh, NC 27609
-----Original Message-----
From: Olin Brimberry [mailto:obrimberry at hunterbane.com]
Sent: Tuesday, January 10, 2017 4:34 PM
Subject: RE: [Healeys] Belleville washers in BN2 steering box
I just pulled mine out of a steering box I am rebuilding, and yes there are 6
positioned as such: ()()() Where only the outer edges touch. The dimensions
are as follows:
ID: 1-1/16
OD: 1-1/2
Pictures of the measurements are attached for verification purposes.
The washers were loose on the shaft, but I think the closer tolerance is going
to be on the OD side.
Olin K. Brimberry, PE
Principal Engineer
obrimberry at hunterbane.com
Office - 919.803.4274 <tel:(919)%20803-4274>
Mobile - 919.522.1608 <tel:(919)%20522-1608>
HunterBane Engineering, PLLC
PO Box 10314
Raleigh, NC 27605
3306 Alamance Drive
Raleigh, NC 27609
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170114/cf8c3d03/attachment.html>
|