Thanks for all the help and advice concerning my query.
I was never happy with where I?d put the coil after swapping generator for
alternator so, as you?ll recall, I was looking for a better location.
It seemed that I might as well try to mount it on top of the alternator. I?d
been assured that alternators would be even less likely to ?interfere? with a
coil than a generator and vice verca and, if that location had been good enough
with a generator (heat and vibration), why not with an alternator?
I bought an old Lucas bracket on eBay, adjusted the curve, got a much longer
bolt and stuck the assembly onto the alternator. Plainly, it wasn?t quite that
simple but that?s the pr?cis version.
See attached.
Simon
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170109/c82889a5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Generator alternator comparison 2013 1.JPG
Type: image/jpeg
Size: 3391344 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170109/c82889a5/attachment-0002.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Generator alternator comparison 2017 1b.JPG
Type: image/jpeg
Size: 3859482 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170109/c82889a5/attachment-0003.jpe>
|